Installation Sheet

3
1.855.715.1800
1. Shut off the power at the circuit breaker and
remove old fixture, including the crossbar.
1. Corte la energía desde el disyuntor y quite el accesorio
viejo con todo y la barra.
1. Coupez le courantauniveau du disjoncteur et
retirezl'anciennelampe, y compris la barre transversale.
2. Carefully unpack your new fixture and lay out all the
parts on a clear area. Take care not to lose any small
parts necessary for installation.
2. Desempaque cuidadosamente su nuevo accesorio y
extienda las partes en un área libre. Ponga cuidado de no
perder ninguna de las partes pequeñas necesarias para la
instalación.
2. Déballezsoigneusementvotrenouveaulampadair
e et étaleztoutes les pièces sur une surfacedégagée.
Faites attention à ne pas perdre les petites
piècesnécessaires pour l'installation.
3. Attach the cross bar (B) to the outlet box (A)
(not supplied) using the 2 screws provided with the
outlet box (A).
3. Adjunte la barra transversal (B) a la caja tomacorriente
(G) (no incluida) usando los 2 tornillos que se
proporcionan con la caja tomacorriente (A).
3. Fixez la barretransversale (B) à la boîte à prises (A) (non
fournie) à l'aide des 2 visfournies avec la boîte à prises (A).
INSTALLATION
INSTALACIÓN
INSTALLATION
CEDAR MANOR
OUTDOOR HANGING PENDANT
LÁMPARA COLGANTE PARA EXTERIORES
LUMINAIRE SUSPENDU D’EXTÉRIEUR
SKU: 440637
Connect Black or Red
Supply Wire (Lead Wire) to:
Connect White Supply
Wire (Neutral Wire) to:
Black wire White wire
*Parallel wire
(round or smooth)
*Parallel wire
(square or ridged)
Clear, brown, gold or black
wire without tracer
Clear, brown, gold or black
wire with tracer
Insulated wire (other than green)
with copper conductor
Insulated wire (other than green)
with silver conductor
* When parallel wires are used,
the neutral wire is ridged down its
length and the other wire is round
and smooth (see illus.).
Neutral Wire