Installation Sheet

1
Surface Mount Medicine Cabinet Installation Instructions
INSTALLATION (NO MOUNTING BRACKET)
3. Remove the medicine cabinet door(s), set aside. Secure the
cabinet to the wall studs with the mounting hardware (provided).
Make sure that your cabinet is level before attaching securely to wall.
4. When your medicine cabinet is securely in place, finish your
installation by reattaching the cabinet door(s).
INSTALLATION (MOUNTING BRACKET)
1. Center the cabinet above the sink at the appropriate height
and draw a leveled outline of your cabinet on the wall.
2. Locate and mark the position of the wall studs to which you
will fasten your medicine cabinet. You can find studs by listen-
ing for a solid sound as you knock on the wall or by using
a stud finder. If mounting holes are not pre-drilled, transfer
these marks to the inside of the cabinet.
Tip: If the studs in your bathroom do not line up to the mounting location for
your cabinet, wood blocking can be installed between the studs using
standard 2 x 4’s. If wood blocking needs to be installed behind the finished
wall, we recommend consulting a professional if you are unfamiliar with this
type of installation.
3. Measure the location of the mounting rail on the back of
the cabinet to determine the location of your wall bracket.
Use the top of the cabinet as your guideline. Use your level to
verify that the wall bracket is properly aligned.
4. Drill pilot holes and install the wall bracket. Because wall
construction and materials vary from home to home, the
appropriate mounting hardware may need to be purchased
from your local hardware store. Consult a professional
if you are unfamiliar with this type of installation.
5. With the help of another person, hang your mirror by
attaching the mounting rail to the wall bracket
SURFACE-MOUNT MEDICINE CABINET
Remove the door
and then reattach
when finished.
Height of
the cabinet
Height inbetween
the cabinet and vanity
Center the cabinet
Locate and mark
on the wall
Install the wall
bracket