Installation Sheet

1
Surface Mount Medicine Cabinet Installation Instructions
INSTRUCTIONS
Unpack and inspect the product for any
shipping damages. If you find damages, do
not install. Contact Customer Service at
1-866-855-2284. If you need assistance or
have questions while installing your medicine
cabinet, contact Customer Service.
We recommend consulting a professional if
you are unfamiliar with installing bathroom
fixtures. Signature Hardwareaccepts no
liability for any damage to the cabinet or wall,
or for personal injury during installation.
TOOLS AND MATERIALS:
Read entire Installation Instructions.
Observe all local building and safety codes.
BEFORE INSTALLING
SURFACE-MOUNT MEDICINE CABINET
Level
INSTALLATION (NO MOUNTING BRACKET)
1. Center the cabinet above the sink at the appropriate height
and draw a leveled outline of your cabinet on the wall.
2. Locate and mark the position of the wall studs to which you will
fasten your medicine cabinet. You can find studs by listening for a
solid sound as you knock on the wall or by using a stud finder. If
mounting holes are not pre-drilled, transfer these marks to the
inside of the cabinet.
Tip: If the studs in your bathroom do not line up to the mounting location for
your cabinet, wood blocking can be installed between the studs using standard
2 x 4’s. If wood blocking needs to be installed behind the finished wall, we
recommend consulting a professional if you are unfamiliar with this type of
installation.
Stud Finder
Pencil
Drill
Height of
the cabinet
Height inbetween
the cabinet and vanity
Center the cabinet
Locate and mark
on the wall