Installation Sheet

ALLISTER/PASAIA TUB FAUCET INSTALLATION
4. Remove the nut and rubber cone washer from the
faucet body, located behind the spout. Discard these
pieces, as they will not be used. Attach the hand
shower cradle by threading it onto this outlet. Ensure
that the rubber washer is inserted into the base of
the cradle before attaching. Tighten firmly using an
adjustable wrench.
3. Attach the spout to the faucet body by threading it
into its outlet, as shown. Apply thread sealant or
plumber’s tape to the threads before attaching.
5Allister/Pasaia Tub Faucet Installation Instructions
6. Using the provided flexible hose, attach the hand
shower to its outlet on the hand shower cradle. Insert
one of the provided rubber washers into each end of
the hose before attaching.
5. Attach the hand shower head to the hand shower
handle. Hand tighten firmly.
Apply thread
sealant or
plumber’s tape
Tighten with an
adjustable wrench.