Installation Sheet

ALLISTER/PASAIA TUB FAUCET INSTALLATION
7. Using the provided flexible hose, attach the hand
shower to its outlet on the hand shower cradle. Insert
one of the provided rubber washers into each end of
the hose before attaching.
8. To attach the faucet handles, first remove the
screw from each valve stem using a phillip’s screw-
driver. Slide one handle onto each stem, then use the
screws to secure.
5. Remove the nut and rubber cone washer from the
faucet body, located behind the spout. Discard these
pieces, as they will not be used. Attach the hand
shower cradle by threading it onto this outlet. Ensure
that the rubber washer is inserted into the base of the
cradle before attaching. Tighten firmly using an
adjustable wrench.
6. Attach the hand shower head to the hand shower
handle. Hand tighten firmly.
3Allister/Pasaia Tub Faucet Installation Instructions
Tighten with an
adjustable wrench.