Manualshelf

Installation Sheet

ManualsBrandsSignature Hardware ManualsBathroom FaucetsSignature Hardware Victorian 1.2 GPM Widespread Bathroom Faucet - Drain Assembly Included
12345678
3
VICTORIAN WIDESPREAD FAUCET
7. From under the countertop, insert the valve stem
into the right-side faucet hole. From above the counter
top, slide one of two decorative escuthceons onto the
stem. Then, attach one of the two bell flanges to the
stem by hand tightening until secure.
10. Use the provided water line to connect the hot and
cold valve stems to the spout’s T-connector. Use an
adjustable wrench to tighten, but be careful not to
overtighten. Apply thread sealant or plumber’s tape to
each threaded connection before attaching.
9. Repeat steps 6-8 for installing the ‘hot’ valve stem
into the left-side faucet hole.
Victorian Widespread Faucet Installation Instructions
8. From beneath the sink, position the stem so that the
outlet on the side of the stem is pointing inward,
towards the T-connector. While holding in place, hand
tighten the lock not. Finish tightening using a basin
wrench.
tighten lock nut