Manualshelf

Installation Sheet

ManualsBrandsSignature Hardware ManualsBathroom FaucetsSignature Hardware Barney 1.2 GPM Widespread Bathroom Faucet with Cross Handles and Pop-Up Drain Assembly
12345678
6
BARNEY WIDESPREAD FAUCET INSTALLATION
Barney Widespread Faucet Installation Instructions
3. From beneath the sink, reattach the flange by
threading it back onto the drain body.
5. Position the drain so that the lever is facing the back
of the fixture, in line with the faucet’s lift rod. While
holding in place, hand tighten the lock nut until secure
then finish tightening with a basin wrench. Be careful
not to overtighten, which can crack a fragile sink.
4. Connect the drain lever by threading it into the hole
on the side of the drain body. The lever must pass
through the hole in the stopper tailpiece to function
properly. Apply a bit of thread sealant or plumber’s tape
to the threads before attaching.
Hand tighten
lock nut
underneath sink