Manualshelf

Installation Sheet

ManualsBrandsSignature Hardware ManualsBathroom FaucetsSignature Hardware Barney 1.2 GPM Widespread Bathroom Faucet with Cross Handles and Pop-Up Drain Assembly
12345678
BARNEY WIDESPREAD FAUCET INSTALLATION
11. Attach the faucet handles to the valve stems, as
shown.
12. Connect the main water supply lines to the valve
stems. Apply plumber’s tape or thread sealant to the
threads before tightening. Proceed to drain installa-
tion. Once completed, turn the faucet on and allow
the water to flow for approximately 60 seconds.
Ensure that there are no leaks, and that both hot and
cold water are running properly.
9. Repeat steps 6-8 to install the ‘hot’ valve stem into
the left-side faucet hole.
10. Use the provided braided water lines to connect
the hot and cold valve stems to the T-connector. Use
an adjustable wrench to tighten, but be careful not to
overtighten. Apply thread sealant or plumber’s tape to
each threaded connection before attaching.
4Barney Widespread Faucet Installation Instructions