Manualshelf

Installation Sheet

ManualsBrandsSignature Hardware ManualsBathroom FaucetsSignature Hardware Elnora 1.2 GPM Bridge Bathroom Faucet with Pop-Up Drain Assembly
12345
ELNORA BRIDGE FAUCET INSTALLATION
INSTALLATION
3. From beneath the sink, slide the rubber washers onto
the faucet body. Thread the locknuts onto the threaded
shanks until hand tight. Tighten firmly.
1. Ensure that the water supply below your sink is
completely shut off by turning the shutoff valves all the
way to the right.
Tip: Place a small bucket below your workspace to
catch any water that may drip during the installation
process.
2. Slide the bell flanges onto the faucet, then insert
the faucet through the mounting holes in your
counter top, as shown.
2Elnora Bridge Bathroom Faucet Installation Instructions
4. Attach the handles to the faucet’s valve stems, as
shown.
OFF