Installation Sheet

TELEPHONE TUB FAUCET INSTALLATION
2. Using the provided flexible hose, attach the hand
shower to its outlet on the hand shower cradle. Insert
one of the provided rubber washers into each end of
the hose before attaching. Tighten firmly.
1. Attach the hand shower cradle to the outlet on the
top of the faucet body, as shown. Ensure that the
rubber washer is inserted into the base of the cradle
before attaching. Tighten firmly using an adjustable
wrench.
5Telephone Tub Faucet Installation Instructions
4. Once installation is complete, turn the faucet on
for appoximately 60 seconds to check for any leaks,
and to ensure that hot and cold water are running
appropriately. Divert water flow to the hand shower
for testing as well.
3. To complete the installation. connect the water
supply lines (not included) to the faucet’s inlets.
Note: This step only applies to deck-mount and inner
tub wall nstallation.
STEP 2: FINAL ASSEMBLY
60 sec