Manualshelf

Installation Sheet

ManualsBrandsSignature Hardware ManualsBathroom FaucetsSignature Hardware 1.2 GPM Bridge Bathroom Faucet with Pop-Up Drain Assembly
123456
68” Bridge Bathroom Faucet Installation Instructions
8” BRIDGE BATHROOM FAUCET INSTALLATION
7. Use the link to attach the faucet’s lift rod to the drain
lever. Pinch the metal clip located on the drain lever to
remove. Slide one end of the clip back onto the lever,
followed by the link, then the second end of the clip to
secure.
8. Attach the lift rod to the top of the link and secure it
by tightening the thumb screw.
9. Make any final adjustments to the positioning of the
link and drain lever as needed. Adjust until the drain fully
opens and closes.
10. Fill your sink to check for any leaks and to ensure
that the drain is functioning properly.
OPEN
CLOSED