Installation Sheet

3Acrylic Clawfoot Tub Installation Instructions
ACRYLIC CLAWFOOT TUB
FEET WITHOUT MOUNTING BAR
1. Carefully lay the tub upside down on towels or other
padding so that the bottom of the tub is facing up.
2. On the tub body, locate each of the mounting holes
for the feet. If the feet contain letters, match the letters
to the corresponding mounting location on the tub.
3. Use the provided hardware to attach each foot to the
tub. Thread the lock nut onto each mounting bolt,
followed by the metal washer. Tighten each bolt firmly
with an adjustable wrench.
Important: Do not to over-tighten. Overtightening
could strip the bolt and/or crack the tub body.
4. Small gaps between the feet and tub are normal,
however, plastic or wood shims can be inserted
between the tub and the foot’s mounting hardware to
accommodate. Adjust the shim and locknut until you
reach the desired look.