Installation Sheet

2Rim Lock Set Installation Instructions
INSTALLATION
6. Attach the door knobs. Separate the door knobs and
spindle, if they are assembled in the package. Insert the
spindle through the hole on the lock body. If your lock set
includes an escutcheon, fasten it to the door with wood
screws. Connect the knobs to the spindle on each side of the
door. Some old knob sets click together using an integral
connector in the spindle. Other knob sets have a hole in the
base of the knob where a set screw can be installed. If your
knob set uses set screws, use an Allen wrench to secure the
set screw, holding the knob in place.
7. Install the rosette. The rosette is a decorative metal plate
that gives the rim lock keyhole a finished look. Place
the rosette on the keyhole on the outside of the door and use
wood screws or nails to fasten it to the door.
8. Test the rim lock set. Test the rim lock by closing the door
and engaging the rim lock with the keys. Make the necessary
adjustments on the position of the strike plate if the
bolt latch disengages when nudged.