Manualshelf

Installation Sheet

ManualsBrandsSignature Hardware ManualsBathroom FaucetsSignature Hardware Leta 1.2 GPM Single Hole Vessel Bathroom Faucet with Pop-Up Drain Assembly
123456
Leta Single Hole Faucet Installation Instructions
LETA SINGLE HOLE FAUCET INSTALLATION
2
INSTALLATION
4. Insert the faucet into the mounting hole. From
beneath the sink, slide the rubber washer onto the
faucet. Secure the faucet to the surface using the lock
nut. Tighten firmly using a basin wrench or adjustable
wrench.
1. Ensure that the water supply below your sink is
completely shut off by turning the shutoff valves all the
way to the right.
Tip: Place a small bucket below your workspace to
catch any water that may drip during the installation
process.
2. Remove the lock nut and rubber washer from the
threaded shank, as shown.
3. Attach the threaded shank to the faucet body.
Thread into the base of the faucet until hand-tight.
OFF