Installation Sheet

ROSEANNA WIDESPREAD FAUCET INSTALLATION
11. Connect the main water supply lines to the valve
stems. Apply plumber’s tape or thread sealant to the
threads before tightening.
12. Turn the faucet on and allow the water to flow for
approximately 60 seconds. Ensure that there are no
leaks, and that both hot and cold water are running
properly.
9. Repeat steps 6-8 to install the ‘cold’ valve stem
into the right-side faucet hole.
10. Use the provided braided water lines to connect
the hot and cold valve stems to the T-connector. Use
an adjustable wrench to tighten, but be careful not to
overtighten. Apply thread sealant or plumber’s tape to
each threaded connection before attaching.
4Roseanna Widespread Faucet Installation Instructions
60 sec
Connect to
T- Connector.
Connect to
Valve System.