Manualshelf

Installation Sheet

ManualsBrandsSignature Hardware ManualsBathroom FaucetsSignature Hardware Dalles 1.2 GPM Widespread Bathroom Faucet with Pop-up Drain Assembly
1234567
DALLES WIDESPREAD FAUCET INSTALLATION
7. From beneath the sink, tighten the lock nut on the
stem until hand tight. Finish tightening using a basin
wrench.
8. Repeat steps 4-7 to install the cold valve stem into
the right-side faucet hole.
5. From below, insert the valve stem through the
left-side faucet hole. From above, thread one of the
decorative handle bases onto the valve stem until
hand tight.
6. Attach the lever handle to the valve stem. Tighten
the set screw on the side of the handle to secure.
Note: If there is brass showing after attaching the
handle, loosen the handle base until there is very
little brass still visible.
3Dalles Widespread Faucet Installation Instructions