Manualshelf

Installation Sheet

ManualsBrandsSignature Hardware ManualsBathroom FaucetsShannon Widespread Bathroom Faucet with Metal Cross Handles and Pop-Up Drain Assembly
1234567
3Shannon Widespread Faucet Installation Instructions
SHANNON WIDESPREAD FAUCET
7. From beneath the counter top, insert the valve stem
through the right-side faucet hole. From above the
counter top, slide one of two decorative escutcheons
onto the stem. Then, attach one of the two bell flanges
to the stem by hand tightening until secure.
8. From beneath the sink, position the stem so that the
outlet on the side of the stem is pointing inward,
towards the T-connector. While holding in place, hand
tighten the lock nut. Finish tightening using a basin
wrench.
9. Repeat steps 6-8 to install the ‘hot’ valve stem into
the left-side faucet hole.
10. Use the provided braided water lines to connect
the hot and cold valve stems to the T-connector. Use
an adjustable wrench to tighten, but be careful not to
overtighten. Apply thread sealant or plumber’s tape
to each threaded connection before attaching.