Leveling Wedges Instructions

11-25-95
8727
ENG
DATE
CAD
COMPANIES COMPANIES
DESCRIPTIONREV
COPYRIGHT ASHLEYCOPYRIGHT ASHLEY
DWG#:
1
BJB
8-8-95A TOTAL REVISIONTOTAL REVISION
---
the unit is level, break off the protruding portion of the wedges.the unit is level, break off the protruding portion of the wedges.
to put them under one front corner and the opposite back corner. Whento put them under one front corner and the opposite back corner. When
until they are snug and the door gaps are even. Usually it will work bestuntil they are snug and the door gaps are even. Usually it will work best
around the doors. Insert the enclosed plastic wedges under the unit sidesaround the doors. Insert the enclosed plastic wedges under the unit sides
An unever floor may cause the unit to twist slightly, causing uneven gapsAn unever floor may cause the unit to twist slightly, causing uneven gaps
LEVELING WEDGESLEVELING WEDGES
INSTRUCTION SHEET FORINSTRUCTION SHEET FOR
WEDGE
LEVELING

Summary of content (1 pages)