Operator`s manual

Signametrics 54

Parameter Type/Description

iScan

int Identifies the Scanner being addressed.

Return Value The return value is one of the following constants.

Value

Meaning

SCAN_OKAY

Operation successfully completed.

Negative Value

Error code

Example

SCANStepCmd(0);

DMMSetRange(0,3V) //Set DMM to appropriate range

DMMRead(0, &Val); //Flush a reading or two

While( ! SCANReady(0)); // Wait for Scanner to be ready

DMMRead(0, &reading); // Read input

SCANTerminate

H/W access Command  Polled Command 

Description Terminate Scanner’s operation, and removes it from PCI configuration.

#include “SMX4032.H”

int SCANTerminate(int iScan)

Remarks This function opens all relays of the selected Scanner, then removes it from the PCI

structure. To use this Scanner again, it is necessary to either, exit the thread, or

reinitialize it. It is not necessary to use this function since exiting the thread will

automatically terminate the scanner. Following the termination operation, the scanner is

not accessible.

Parameter

Type/Description