Operator`s manual

77 Signametrics
Rem nction is limited for servicing the DMM. It has no use in normal DMM operation..
ClosePCI() function.
Parame
arks This fu
See also DMM
ter Type/Description
nDmm
ies the DMM. DMMs are numbered starting with zero.
lue
Value
int Identif
Return Va Integer error code.
Meaning
DMM_
lly completed.
alue
Erro
Example int status
DMMOpenCalACCaps
2042 
Description Calibrate the AC rcuit capacitance function.
nclude "sm204
int DMMOpenC
Remarks tion cha e selected range of the AC Capacitance measurement path
aking measurements. For better accuracy it
frequently. The Open Terminal calibration should be performed
ce at
t nds to
complete the process. Make sure to perform this operation for each range you intend to
OKAY
Operation successfu
Negative V
r code
= DMMOpenPCI(0);
SM2040  SM SM2044 ;
based in ci
#i 032.h"
alACCapsl(int nDmm)
This func
and source, which is required prior to m
racterizes th
should be performed
with the test leads connected and open. This function characterizes the stimulus sour
the specific frequency associated with the selected range. It takes abou fifteen seco
use.
Parameter Type/Description
nDmm
MM. DMMs are numbered starting with zero.
Return Value
int Identifies the D
Integer error code.
Value Meaning
DMM_
Negativ
Example
DMMOpenTer
SM2040  SM2042 
Description
#include "sm204032.h"
int DMMOpenTerminalCal(int nDmm)
OKAY
Operation successfully completed.
e Value
Error code
int status = DMMOpenCalACCaps(0);
minalCal
SM2044 ;
Calibrate the Inductance measurement function with open terminals.