Operator`s manual

59 Signametrics
6.0 Accessories
Several accessories are available for the SM4000 relay Scanners, which may be purchased directly from
Signametrics or one of its distributors or representatives. Please see the ‘Accessories’ section on our web-site for the
current accessories available: http://www.signametrics.com
The following 96 position Female connectors are sourced from a large number of manufactureres, and are all
DIN41612 Type "C"
• Signametrics SM40 - Terminal Block. 40 channel screw terminal block, which plugs in to the scanner’s 96 pin
DIN connector.
• Signametrics SM
40T - Isothermal Terminal Block for Thermocouples. Applicable for the SM4042 model only.
40 channel screw terminal block with reference junction temperature sensor for Thermocouple temperature
measurements. Operates in conjunction with the SM2040, SM2042, SM2044, SMX2040 and SMX2044
DMMs. It plugs into the scanner’s 96 pin DIN connector.
• Si
gnametrics SM
40L – Loop back test connector. Required for self tests and contact cleaning operations.
• Female 96 position mating connector with solder tabs: Erni 913152, 543202, Conec 122A10359X, Elco/Avx
20 8457096 009 25.
• Female 96 position mating connector with crimp connection: Erni 024069 (housinig), 014748 (crimps),
El
co/Avx 60 84643014 00 000 (housing), 20 84640213 00 657 (crimps).
• Female 96 position right angle mating PCB solder connector: Molex 85052-0311, Conect 122A10859X.
7.0 Warranty and Service
The SM4000 series Scanners are warranted for a period of one year from
the date of purchase. This warrantee does
not include relay wear or damage.
If your unit requires repair, contact your Signam
e
trics representative. There are no user serviceable parts within the
SM4000 Scanners. Removal of any of the four external shields will invalidate your warranty. For in-warranty
repairs, you must obtain a return materials authorization (RMA) from Signametrics prior to returning your unit.