Operator`s manual

9 Signametrics
1.2 Minimum Requirements
The SM2060 series of system DMM’s are precision plug-in modules that are compatible with IBM type personal
computers (PCs), PXI and cPCI chassis. It requires as a minimum a Pentiums computer. They require a half-length
expansion slot on the PCI bus or 3U PXI slot. A mouse must be installed when controlling the DMM from the
Windows Control Panel. The SM2060 comes with a Windows' DLL, for operation with Windows' Version
95/98/Me/2000/XP and NT4.0.
1.3 Feature Set
The base unit, the SM2060, has traditional 7-1/2 digit features and it can be used as a general purpose DMM, where
accuracy and speed are important. The High Workload Multi Function SM2064 adds timing, capacitance,
inductance, sourcing and a lot more speed. With its specialized measurements, it can replace some costly
instruments, shrinking the size and cost of a test system.
SM2060 and SM2064 7½ Digit DMM’s feature table:
Function SM/SMX2060
DMM
SM/SMX2064
High Workload
DMM
DCV five ranges 240mV to 330V
√ √
ACV five ranges 240mV to 330V
√ √
2-Wire Ohms, six ranges 240 Ω to 24 MΩ √ √
4-Wire Ohms, six ranges 240 Ω to 24 MΩ √ √
DC current, four ranges 2.4 mA to 2.4 A
√ √
AC current, four ranges 2.4 mA to 2.4 A
√ √
Diode V/I characteristics at 100 ηA to 1mA √ √ (plus 10mA)
Auto range, Relative
√ √
Min/Max, dB and percent deviation functions
√ √
On board measurement buffer
√ √
External and threshold trigger
√ √
Thermocouples type; B, E, J, K, N, R, S, T
√ √
High Dynamic range; +24,000,000 counts
√ √
Frequency / Period measurement
√ √
Measurement rate: 0.2 to 1,400/sec
√ √
Measurement rate: to 20,000/sec
√
Capacitance, ramp type, eight ranges, 1 nF to 10 mF
√
Capacitance, In-Circuit method five ranges, 24nF to 2.4mF
√
Inductance, six ranges 33 µH to 3.3 H √
Internal DMM temperature sensor
√
Offset Ohms
√
Temperature types pt385, 3911, 3916, 3926, Copper, variable Ro
√
Pulse width, pos./neg., & duty cycle
√
Totalizer/event counter
√
Variable threshold DAC; all timing measure.
√
Peak to Peak, Crest factor, Median
√
Six wire Ohms (with force/sense)
√
DCV source to ±10.0 V
√
ACV source 0 to 20 V pk-pk, 2 Hz to 75 KHz
√
DC current source, 1 nA to 12.5 mA
√
Leakage measurement to ±10.0V three ranges 240nA, 2.4uA, 25uA
√
Expanded ranges
√
2-Wire Ohms two additional ranges 24 Ω and 240 MΩ √
4-Wire Ohms additional range 24 Ω √
Resistance with V&I limits (to 10GΩ) √
DC Current four additional ranges 240nA, 2.4µA, 24µA, 240µA √