Operator`s manual

Signametrics 70
Parameter
Type/Description
nDmm
int Identifies the DMM. DMMs are numbered starting with zero.
dDelay
double This post-trigger delay value can be 0.0 to 1.0
iSamples
wing a trigger. This
value must be between 1 and 80 or 120 depending on set resolution.
Exa Buffer[50]; //Delay 0.1s, take 50 samples
while( ! DMMReady(0) ); // wait for completion
mm, Buffer[i]); // read
DMMDisableT
SM2060 
t DMMDisableTrimDAC(int nDmm)
Remarks is function di C. Since usage of the Trim DAC consumes the
on-board microcontroller’s resources it
must
int The number of samples the DMM takes follo
mple double
DMMDelayedTrigger(0, 0.1, 50);
for(i=0;i<50;i++) DMMReadBuffer(nD
rimDAC
Description Terminate the operation of the Trim DAC.
#include "SM206032.h"
in
Th sables the Trim DA
be turned off with this function when not in
use. See DMM
more details.
Parameter
SetTrimDAC, DMMSetDCVSource and DMMSetACVSource for
Type/Description
nDmm
int Identifies the DMM. DMMs are numbered starting with zero.
Return Value Integer error code.
Value
Meaning
DMM_OKAY
Operation successfully completed.
Negative Value
Error code
xample DMMDisableTrimDAC(0); // Remove Trim DAC from operation
igger
SM2060 ; SM2064 ;
Description bort trigger operation.
int DMMDisArmTrigger(int nDmm)
Remarks
t can be used following an external hardware or
analog level trigger arm command (DMMArmAnalogTrigger, DMMArmTrigger, or
MTrigger
E
DMMDisArmTr
A
This function sends the DMM a trigger termination command. If the DMM is waiting
for a trigger, following one of the Triggered operations, it will terminate the operation
and will be ready for a new operation. I
DM ).