Operator`s manual
125 Signametrics
iTempU
int Temperature units can be either DEG_F for
°F,
or DEG_C for
°C.
°C.
Return Value wing constants.
Value
nits
The default is
The return value is one of the follo
Meaning
DMM_O
.
alue
Example int status = DMMSetTempUnits(0, DEG_F) // set units to °F
SM2060 ; SM
Description Enables and sets ync output.
nclude "SM2
em This function sets the external hardware trigger polarity. For negative edge set iPolarity
to 0, and 1 for positive edge. The default is negative polarity. This effects the various
rigger operations.
Parame
KAY
Function succeeded
Negative V
Error code
DMMSetTrigPolarity
2064 ;
polarity of DMM S
#i 06032.h"
int DMMSetTrigPolarity(int nDmm, int iPolarity)
R arks
hardware t
ter Type/Description
nDmm
fies the DMM. DMMs are numbered starting with zero.
iPolarity
of the inut edge. 0 sets it to negative and 1
to positive edge.
Return Value
Value
int Identi
int Determines the polarity
The return value is one of the following constants.
Meaning
DMM_
Negativ
Example int status = DMMSetTrigPolarity(0, 1); //set positive edge trigger
DMMSetTrigRead
SM2060 ; SM2064
Description Setup the DMM
nclude "SM2
#include "DMMUser.h"
iSamples, int iEdge)
OKAY
Function succeeded.
e Value
Error code
;
for mutiple Triggered readings operation.
#i
06032.h"
int DMMSetTrigRead(int nDmm, int iSettle, int