Specifications

20
(2) Make sure “EDIT AREA” is blinking, “SCAN INTERVAL”
is not blinking, and the unit is not in PC name editing
mode.
(3) Use the Left/Right arrow key to select BANK.
(4) Use the Up/Down arrow key to move  to the PC that
you’d like to switch to.
(5) Press the ENTER key to switch to the desired PC and
exit the OSD MENU.
NOTE: Only PCs that are powered on can be switched.
How to use the OSD MENU to trigger the SCAN
MODE:
(1) Call up the OSD MENU.
(2) Select SCAN TIME if necessary.
(3) Make sure “EDIT AREA” is blinking. “SCAN INTERVAL”
is not blinking and not in PC name editing mode.
(4) Press the F2 key to trigger the SCAN MODE and exit
the OSD MENU.
How to exit the OSD MENU without switching