Specifications

♦ Pressing the F2 key will exit OSD MENU and start

SCAN operation.

NOTE: Only PCs that are powered on can be switched.

 SCAN INTERVAL

♦ While the EDIT AREA is active, press the F1 key to

switch to this area, and the “SCAN INTERVAL” will

blink; then you can use the LEFT/RIGHT arrow

keys to select the desired scan interval. After the

selection is made, press the ENTER key to return to

the EDIT AREA.

NOTE: Please pause 1 second between each switching

operation if you are making successive switching

changes, otherwise sometimes there will be no

response due to the delay of the keyboard and

mouse reset.