Specifications

bank boundary.

• The right button is CH+. Push this button to advance to

the next powered-on PC in the cycle, and it will cross the

bank boundary.

If the CH+ button is pushed and held over 1 second, the

SCAN LED will be lit, and the buzzer will beep twice; now

the FO-098-8080 KVM Switch is in SCAN mode. To return

to NORMAL mode, either push the CH+ button on the front

panel and release within 1 second, or press the SPACE bar

on the keyboard.

Keyboard Hot Keys

Select a PC by the keyboard hot keys:

Press the Scroll Lock key twice within 1 second to enter Hot

Key mode. In Hot Key mode, the keyboard status LED will

flash and wait further input from the user; after the user’s

action is completed, press the ESC key to leave Hot Key

mode.

Note: Pressing a key means to depress the key then

release it immediately; if the input is correct, the

buzzer will beep to confirm it.

• To switch to the next powered-on PC:

→ Press the ‘RIGHT SHIFT’ key.

• To switch to the previous powered-on PC:

→ Press the ‘LEFT SHIFT’ key.

• To select a BANK directly: