Specifications

10
2
INSTALLATION
Operating Environment
The Signamax CommandView™ KVM Switch must be
installed and operated within the limits of the specified
operating temperatures and humidity (see previous section
under Specifications). Do not place objects on top of the
unit. Do not obstruct any vents at the sides of the unit. Do
not position the unit near any heating source such as a
heater, radiator, or direct exposure to the sun. Prevent entry
of water and moisture into the unit. If necessary, use a
dehumidifier to reduce humidity.
Installation
Please make sure that all the PCs are turned off before
connecting or disconnecting cables to the Signamax
CommandView FO-098-8080.
Installing One FO-098-8080
• Set the bank address to 0, the master bank. (please refer