User`s manual

• Make sure the cable is firmly plugged into the PC port

connector and the PC.

• Do not use AT to PS/2 or PS/2 to AT mouse adapters.

• Do not unplug and plug the mouse without shutting down

your PC first.

• For model 098-8040 which supports mouse translation,

connect only a PS/2 mouse to the console.

• For model 098-8020 which DOES NOT support mouse

translation, only, a PS/2 mouse connected to console port

will control the PC's PS/2 mouse port and an AT mouse

connected to console port will control the PC's AT mouse

port. You must connect both PS/2 and AT mice to the

console ports if you plan to control one PC's PS/2 mouse

port and the other PC's AT mouse port. Do not connect

both PC's mouse ports to a single CPU, even though your

PC may support both.

4. Lost keyboard control

• Do not type any key on the keyboard before the channel is

completely switched to the new channel as indicated by

the change of the display screen.

• Make sure the cables is firmly plugged into the console

connector.

• Make sure the cables is firmly plugged into the PC port

connectors.

• Make sure the unit is not in automatic scan mode.

• Try to switch to another channel and switch back.

• For model 098-8040, do not connect both AT and PS/2

keyboard to the console keyboard connectors.