User`s manual

4
LEDS & BUZZER
LEDs
All the KVM Switch LEDs are located in the front panel.
Please refer to the section of "Front & Real Panel
Description: under Chapter 1 :Introduction" for the detailed
location of each LED.
Ready LED
When a PC is properly connected to the KVM
Switch and the PC is powered on, the Ready LED
corresponding to that PC will be lit.
Active LED
Indicates the currently selected PC. Only one
Active LED will be lit although more than one computer is
connected.
Scan LED
LED is lit when the KVM Switch is operating in
the automatic scan mode.
Power LED LED is lit when the KVM Switch is operating
on.
BUZZER
A buzzer is built inside the unit to provider audio
confirmation of channel switching and activation /
deactivation of the automatic scan mode.
16