User`s manual

15
1. To select a channel(PC):
Push the SELECT button (and release within one second) to
select next channel and repeat until desired channel is
selected. The built-in buzzer will beep once to confirm each
channel switching. The ACTIVE LED will switch and identify
which channel is currently under control.
2. To activate Automatic Scan mode
Push the SELECT button and hold for more than one
second to activate the Scan mode.
The built-in buzzer will beep twice to confirm the activation.
The SCAN LED will be lit to indicate the operation of SCAN
mode.
3. To deactivate Automatic Scan mode
Press Space Bar key or push SELECT button.
The built-in buzzer will beep twice to confirm the
deactivation. The SCAN LED will be turned off to indicate
the end of SCAN mode.
Front-Panel Push Buttons