User`s manual

14
Hot Keys are entered by pressing the "CTRL", "ALT" and
"SHIFT" keys simultaneously, then releasing all, followed by
a digit keystroke and ending with an "ENTER" keystroke.
1. To select a channel (PC)directly:
CTRL+ALT+SHIFT channel# <ENTER>
The "#" represents the channel number from 1 to 2 or 4 (4-
port model) or 6 (6-port model). The built-in buzzer will beep
once to confirm the channel switching. The ACTIVE LED will
switch and identify which channel is currently under control.
2. To activate Automatic Scan mode:
CTRL+ALT+SHIFT 0 <ENTER>
The built-in buzzer will beep twice to confirm the activation.
The SCAN LED will be lit to indicate the operation of SCAN
mode.
3. To deactivate Automatic Scan mode:
Press Space bar key or push SELECT button.
The built-in buzzer will beep twice to confirm the
deactivation. The SCAN LED will be turned off to indicate
the end of SCAN mode.