User`s guide

www.citybuildcatalog.com
Pole Line Hardware
Bolts, Machine
Hot Dip Galvanized
Square Head and Square Nut
Minimum Tensile-Strength 13,550 Lbs.
Bolt Length Thread Length
Part # (inches) Dia. (inches) Price
J8810 10 5/8” 6 $1.39
J8812 12 5/8” 6 $1.55
J8814 14 5/8” 6 $1.75
J8816 16 5/8” 6 $2.20
Bolts, Thimbleye®
Bolt Length Thread Length
Part # (inches) Dia. (inches) Price
J8052 Straight Type 12 5/8” 6 $5.50
J8053 Straight Type 14 5/8” 6 $5.79
J8054 Straight Type 16 5/8” 6 $6.95
J8152 Angle Type 12 5/8” 6 $6.05
J8153 Angle Type 14 5/8” 6 $7.25
J8154 Angle Type 16 5/8” 6 $7.90
Clamps, Cable Suspension, Angle
Hot Dip Galvanized
Angle Suspension Clamps have curved ends to prevent damage to the messenger strand when
turning small angles. All clamps firmly grip 1/4 to 7/16 –inch diameter strand. They are
furnished with two track bolts and a center mounting hole.
Clamp Clamp Clamp Bolt Mounting Hole
Width Length Diameter Diameter
Part # (inches) (inches) (inches) (inches) Price
J7901A 1-11/16 5-3/4 ½ 11/16 $5.45
Clamps, Cable Suspension
Hot Dip Galvanized
No. Clamp Bolt Clamp Mounting Hole Strand
of Diameter Length Diameter Diameter
Part # Bolts (inches) (inches) (inches) (inches) Price
J1096 3 1/2 5-3/4 11/16 x 15/16 1/4 to 7/16 $4.30
Phone [phone] Fax [phone] Page 32