User`s manual

Signamax  FO-065-7732AF Manageable Gigabit Switch
User’s Manual 69
PORT SETTING
Step 1: Click Basic Setup _ LAN Port _ Port Setting to show the
configuration for all ports.
Step 2: In the Port column, click the port you want to configure.
Admin Setting
Step 3: Click the drop-down menu under Admin Setting, decide to disable
or enable it.
<Note> Disable: places the port in DOWN state. In this state, packets cannot
be switched to and from the port
Enable: places the port in UP state. In this state, packets can be
switched to and from the port.
Speed/Duplex Options
Step 4: Click the drop-down menu under Speed/Duplex Options if you
want to change the line speed and duplex settings.
<Note> Auto: allows the switch to automatically ascertain the line speed and
duplex mode.
All the other selections force the port to use a specific line speed and
duplex mode.
‘HD’ denotes half-duplex mode; FD denotes full-duplex mode.
Flow Control Options
Step 5: Click the drop-down menu under Flow Control Options if you
want to configure (Auto/Disable/Enable) the flow control for this
port.
<Note> Auto: allows the switch to automatically ascertain whether or not to
use flow control.
Enable: turns on flow control at all times.
Disable: turns off flow control at all times.
Step 6: Click Update Setting when completed. A confirmation window
appears.
<Note> The information here displayed automatically updates every 15
seconds, without requiring you to refresh the window.