User`s manual

Signamax  FO-065-7732AF Manageable Gigabit Switch
64 User’s Manual
Performing File Activities
Start with Selection Menu
Click the [File] button at the upper field of the main display, the menu
options appear.
SAVING SETTING
Step 1: Click Saving Setting to save your configuration settings.
Step 2: When you click it, a message asks ”Are you sure you want to
save setting? ”, click OK to save it or Cancel to abort it.
RECEIVE FILE VIA TFTP
Step 1: Click Receive File Via TFTP on the [File] display
<Note> The TFTP protocol is used to download upgraded software to the
switch.
A VLAN with the proper IP address and routing path to the TFTP server
must be configured for the switch to access the specified TFTP server.
Step 2: For File Name, type the name of the file you intend to receive.
Step 3: For IP Address, type the IP address from where the file will be
obtained.
Step 4: Click Receive Now! .
REBOOT
Step 1: Click Reboot on the [File] display.
Step 2: When you click it, a message asks ”Are you sure you want to
save setting? ”, click OK to save it or Cancel to abort it.
LOGOUT
Step 1: Click Logout on the [File] display.
Step 2: When you click it, a message asks ”Are you sure you want to
save setting? ”, click OK to save it or Cancel to abort it.