User`s manual

Signamax  FO-065-7732AF Manageable Gigabit Switch
26 User’s Manual
SLIP
Step 6: Move to highlight SLIP and press <Enter> if you want to change it,
Disabled or Enabled.
<Note> If you enable SLIP, a message tells you that the console port becomes
accessible only through the SLIP protocol after you logout from the
current console screen.
SLIP Address
Step 7: Move to highlight SLIP Address and press <Enter> if you want to
set it.
SLIP Subnet Mask
Step 8: When SLIP IP address is entered, move to highlight SLIP Subnet
Mask and press <Enter>. Enter a suitable subnet mask.
<Note> You must enter a SLIP address before you can enter a SLIP subnet
mask.
Return to Basic Management
Step 9: Press <Esc> to return to [Basic Management] screen when
completed.