Manageable Gigabit Switch Signamax Connectivity Systems Manageable Gigabit Switch Model FO-065-7732AF U S E R ’ S G U I D E User’s Manual 1
Signamax Connectivity Systems Manageable Gigabit Switch Model FO-065-7732AF User’s Guide
Signamax FO-065-7732AF Manageable Gigabit Switch Preface This manual describes how to install and use the Signamax FO-065-7732AF Manageable Gigabit Switch. This switch introduced here is designed to deliver full scalability with SNMP/RMON web-based management functions by providing: l l 24 x 100BaseFX fixed ports With fixed 2 x 1000BaseSX/LX ports For the fiber ports, it allows options of fiber type and wavelength at user’s discretion.
Signamax FO-065-7732AF Manageable Gigabit Switch Table of Contents PREFACE 1 TABLE OF CONTENTS 2 PRODUCT OVERVIEW 4 SIGNAMAX FO-065-7732AF MANAGEABLE GIGABIT SWITCH4 PACKAGE CONTENTS 4 PRODUCT HIGHLIGHTS 5 Basic Features Management Support 5 5 FRONT PANEL DISPLAY PHYSICAL PORTS SWITCH MANAGEMENT 7 8 9 Administration console via RS-232 serial port Web-based browser interface External SNMP-based network management application 9 9 9 INSTALLATION 10 SELECTING A SITE FOR THE SWITCH CONNECTING TO
Signamax FO-065-7732AF Manageable Gigabit Switch Static Filtering MAC Address In-Filters Spanning Tree Functions SNMP Functions Other Protocols Port Trunking Port Mirroring QoS Setup Sending and Receiving Files LOGOUT SAVE SETTINGS RESTORE DEFAULT SETTINGS REBOOT WEB -BASED BROWSER M ANAGEMENT LOGGING ON TO THE SWITCH UNDERSTANDING THE BROWSER INTERFACE PERFORMING FILE A CTIVITIES Start with Selection Menu PERFORMING BASIC SETUP A CTIVITIES Start with Selection Menu LAN Port Configuration Console Port Co
Signamax FO-065-7732AF Manageable Gigabit Switch Product Overview Signamax FO-065-7732AF Manageable Gigabit Switch Front View Package Contents When you unpack the product package, you shall find the items listed below. Please inspect the contents, and report any apparent damage or missing items immediately to your authorized reseller.
Signamax FO-065-7732AF Manageable Gigabit Switch Product Highlights Basic Features l l l l l l l l l l Fixed 24 x 100BaseFX ports With fixed 2 x 1000BaseSX/LX ports Full wire-speed forwarding rate Store-and-forward mechanism Back-pressure and IEEE 802.3x compliant flow control Supports 12K MAC addresses Provides 2MBytes memory buffer Front panel reset button Front panel port status LEDs Standard 19” rackmount size, one-unit-height Management Support VLAN l Port-based VLAN l 802.
Signamax FO-065-7732AF Manageable Gigabit Switch l l IP Multicast: IGMP Snooping Maximum of 128 VLANs and IP multicast sessions Rate Control NETWORK MANAGEMENT METHODS l Console port access via RS-232 cable l Telnet remote access l SNMP agent: MIB-2 (RFC1213) Bridge MIB (RFC1493) RMON MIB (RFC1757) – statistics, history, alarm and events VLAN MIB (802.
Signamax FO-065-7732AF Manageable Gigabit Switch Front Panel Display • POWER This LED comes on when the switch is properly connected to power and turned on. ‚ Port Status LEDs The LEDs are located at the left side of the switch, displaying status for each respective port. Please refer to the following table for more details. LED State Indication On A valid network connection established. LNK stands for LINK. Flashing Transmitting or receiving data. On Connection in full duplex mode.
Signamax FO-065-7732AF Manageable Gigabit Switch Physical Ports The Manageable Gigabit Switch provides: l Fixed 24 x 100BaseFX ports l With fixed 2 x 1000BaseSX/LX ports CONNECTIVITY l SC connectors on 1000SX/LX ports l ST or SC connectors on 100FX ports MODE SELECTION • 100BaseFX full-duplex mode • 100BaseFX half-duplex mode • 1000BaseSX/LX full-duplex mode • 1000BaseSX/LX half-duplex mode • Auto-negotiating mode 8 User’s Manual
Signamax FO-065-7732AF Manageable Gigabit Switch Switch Management Administration console via RS-232 serial port The switch provides an onboard serial port, which allows the switch to be configured via a directly connected terminal or a Telnet session. Web-based browser interface The switch also boasts a point-and-click browser-based interface that lets users access full switch configuration and functionality from a Netscape or Internet Explorer browser.
Signamax FO-065-7732AF Manageable Gigabit Switch Installation This chapter gives step-by-step instructions about how to install the switch: Selecting a Site for the Switch As with any electric device, you should place the switch where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference. Specifically, the site you select should meet the following requirements: -The ambient temperature should be between 32 and 104 degrees Fahrenheit (0 to 40 degrees Celsius).
Signamax FO-065-7732AF Manageable Gigabit Switch Connecting to Your Network Cable Type & Length It is necessary to follow the cable specifications below when connecting the switch to your network. Use appropriate cables that meet your speed and cabling requirements. Cable Specifications Speed Connector Port Speed Half/Full Duplex Cable Max. Distance 100BaseFX (*Wavelength of 850nm) 100BaseFX (*Wavelength of 1300nm) 1000BaseSX (*Wavelength of 850nm) ST, SC 100/200 Mbps 62.
Signamax FO-065-7732AF Manageable Gigabit Switch Cabling Step 1: First, ensure the power of the switch and end devices is turned off. Always ensure that the power is off before any installation. Step 2: Prepare cable with corresponding connectors for each type of port in use. Step 3: Consult Cable Specifications Table on previous page for cabling requirements based on connectors and speed. Step 4: Connect one end of the cable to the switch and the other end to a desired device.
Signamax FO-065-7732AF Manageable Gigabit Switch Switch Management This chapter explains the methods that you can use to configure management access to the switch. It describes the types of management applications and the communication and management protocols that deliver data between your management device (workstation or personal computer) and the system. It also contains information about port connection options.
Signamax FO-065-7732AF Manageable Gigabit Switch Administration Console The administration console is an internal, character-oriented, menu-driven user interface for performing system administration such as displaying statistics or changing option settings. Using this method, you can view the administration console from a terminal, personal computer, Apple Macintosh, or workstation connected to the switch’s console port. There are two ways to use this management method: direct access or modem access.
Signamax FO-065-7732AF Manageable Gigabit Switch Modem Access You can access the switch’s administration console from a PC or Macintosh using an external modem attached to the console port. The switch management program provides Console Port screen, accessible from the Basic Management screen, that lets you configure parameters for modem access. When you have configured the external modem from the administration console, the switch transmits characters that you have entered as output on the modem port.
Signamax FO-065-7732AF Manageable Gigabit Switch only read MIBs. The default get and set community strings for the switch are public. Protocols The switch supports the following protocols: VIRTUAL TERMINAL PROTOCOLS, SUCH AS TELNET A virtual terminal protocol is a software program, such as Telnet, that allows you to establish a management session from a Macintosh, a PC, or a UNIX workstation.
Signamax FO-065-7732AF Manageable Gigabit Switch M e n u -Driven Console Management The switch provides a menu-driven console interface for configuration purposes. The switch can be configured either locally through its RS-232 port or remotely via a Telnet session. For the later, you must specify an IP address for the switch first. This chapter describes how to configure the switch using its menu-driven console. * For initial IP settings, you must configure the switch through its RS232 port.
Signamax FO-065-7732AF Manageable Gigabit Switch Logging on to the switch At the screen prompt Login: Password: LOGIN NAME Enter the console interface factory default console name admin. PASSWORD Enter the factory default password (no password, press directly). Or enter a user-defined password if you followed the instructions later and changed the factory default password. Factory Default Password: no password, press directly.
Signamax FO-065-7732AF Manageable Gigabit Switch Switch Management Screen BASIC MANAGEMENT Basic management activities. ADVANCED MANAGEMENT Advanced management activities. LOGOUT Highlight this option and press Enter to log out. SAVE SETTINGS Highlight this option and press Enter to save the current settings and remain in the configuration program. RESTORE DEFAULT SETTINGS Highlight this option and press Enter to restore the factory default settings. REBOOT Highlight this option and press Enter to reboot.
Signamax FO-065-7732AF Manageable Gigabit Switch Performing Basic Management Activities Basic management activities consist of General, LAN Port, and Console Port tasks. Start with Selection Menu Step 1: Highlight [Basic Management] from [Switch Management] screen and press . The [Basic Management] screen appears: Step 2: Highlight a desired option and press . Or press to exit.
Signamax FO-065-7732AF Manageable Gigabit Switch General Management Configurations Step 1: Highlight [General] from [Basic Management] screen and press . System Name Step 2: System Name is highlighted. Press if you want to change it. Location Step 3: Move to highlight Location and press if you want to change it. admin Password Step 4: Move to highlight admin Password and press if you want to change it.
Signamax FO-065-7732AF Manageable Gigabit Switch Reboot-On-Error Step 7: Move to highlight Reboot-On-Error and press if you want to change it, Disabled or Enabled. Remote Telnet Login Step 8: Move to highlight Remote Telnet Login and press if you want to change it, Disabled or Enabled. Remote HTTP Login Step 9: Move to highlight Remote HTTP Login and press if you want to change it, Disabled or Enabled.
Signamax FO-065-7732AF Manageable Gigabit Switch SPEED & FLOW CONTROL Step 2: Speed & Flow Control is highlighted. Press if you want to set speed or flow control on port. Step 3: Highlight All (10/100M or 1000M) Ports and press to configure at one time. Otherwise, move to highlight each port and press to configure individually. Step 4: Port Setting Options screen appears. Highlight Speed & Flow Control and press .
Signamax FO-065-7732AF Manageable Gigabit Switch Step 8: Press to a previous screen as shown in Step 3. PHYSICAL PORT ADDRESS Step 9: Press to a previous screen as shown in Step 1. Step 10: Move to highlight Physical Address to view physical port address. Return to Basic Management Step 11: Press to return to [Basic Management] screen when completed.
Signamax FO-065-7732AF Manageable Gigabit Switch Console Port Configurations Step 1: Move to highlight [Console Port] from [Basic Management] screen. Baud Rate Step 2: Baud Rate is highlighted. Press if you want to change the current console baud rate. Flow Control Step 3: Move to highlight Flow Control and press if you want to change the current flow control method.
Signamax FO-065-7732AF Manageable Gigabit Switch SLIP Step 6: Move to highlight SLIP and press if you want to change it, Disabled or Enabled. If you enable SLIP, a message tells you that the cons ole port becomes accessible only through the SLIP protocol after you logout from the current console screen. SLIP Address Step 7: Move to highlight SLIP Address and press if you want to set it.
Signamax FO-065-7732AF Manageable Gigabit Switch Performing Advanced Management Activities Advanced management activities consist of L2 Switching DataBase / IP Networking / Bridging / Static Filtering / Spanning Tree / SNMP / Other Protocols / Port Trunking / Port Mirroring / QoS Setup / File Transfer. Start with Selection Menu Step 1: Highlight [Advanced Management] from [Switch Management] screen and press .
Signamax FO-065-7732AF Manageable Gigabit Switch PORT MIRRORING Mirror one port to another. QOS SETUP Specify Quality of Service parameter. FILE TRANSFER Send files using the TFTP or Kermit protocol. L2 Switching DataBase Highlight [L2 Switching DataBase] from [Advanced Management] screen and press .
Signamax FO-065-7732AF Manageable Gigabit Switch User’s Manual 29
Signamax FO-065-7732AF Manageable Gigabit Switch VLAN & PVID PERSPECTIVE There are three types of private VLAN ports: promiscuous, isolated, and community. 1. A promiscuous port communicate with all other private VLAN ports and is the port you use to communicate with routers, servers, and administrative workstations. 2. An isolated port has complete Layer 2 separation from other ports within the same private VLAN with the exception of the promiscuous port. 3.
Signamax FO-065-7732AF Manageable Gigabit Switch Step 2: Highlight the VLAN Settings and press to view VLAN info of the default VLAN or if you want to obtain a VLAN perspective instead of the default VLAN. Default VLAN: The IEEE802.1Q standard defines VLAN ID #1 as the default VLAN. The default VLAN includes all the ports as the factory default. The default VLAN’s egress rule restricts the ports to be all untagged, so it can, by default, be easily used as a simple 802.1D bridging domain.
Signamax FO-065-7732AF Manageable Gigabit Switch Step 12: Return to Step 9. Move to highlight VLAN Settings and press . The screen appears as shown in Step 3 for adding or deleting switch ports. Step 13: Highlight the VLAN & PVID Perspective and press . Step 14: Highlight the PVID Settings and press to apply PVIDs to the ports. Step 15: Highlight the port and press to enter PVID to the port.
Signamax FO-065-7732AF Manageable Gigabit Switch IP MULTICAST GROUP PERSPECTIVE Step 1: Move to highlight [Other Protocols] from [Advanced Management] screen and press . Step 2: Move to highlight IGMP and press to change the Disable to Passive or Active. Step 3: Move to highlight [IP Multicast Group Perspective] from [L2 Switching DataBase] screen and press . Step 4: Move to highlight an address to view information associated with this IP multicast group.
Signamax FO-065-7732AF Manageable Gigabit Switch MAC ADDRESS PERSPECTIVE Step 1: Move to highlight [MAC Address Perspective] from [L2 Switching DataBase] screen and press . Step 2: 34 Enter a MAC address to view characteristics information, corresponding VLANs, and corresponding ports in the switching database.
Signamax FO-065-7732AF Manageable Gigabit Switch PORT PERSPECTIVE Step 1: Move to highlight [Port Perspective] from [L2 Switching DataBase] screen and press . You can view VLAN activities and RMON statistics here. Per Port VLAN Activities Step 2: Per Port VLAN Activities is highlighted. Press . Step 3: Move to highlight a port and press . E.g. select Port 1 to view corresponding VLAN Activities. Step 4: View or search by MAC address individually.
Signamax FO-065-7732AF Manageable Gigabit Switch IP Networking Move to highlight [IP Networking] from [Advanced Management] screen and press . IP & RIP SETTINGS Step 1: Highlight [IP & RIP Settings] from [IP Networking] and press .
Signamax FO-065-7732AF Manageable Gigabit Switch Initial IP Settings Step 2: Move to highlight IP Address and press .
Signamax FO-065-7732AF Manageable Gigabit Switch Step 3: Type an IP address and press Step 4: Press until you return to [Switch Management] screen. Make sure you save the settings before you log out Bridging Move to highlight [Bridging] from [Advanced Management] screen, and press . AGING TIME Step 1: Move to highlight Aging Time and press . Aging Options Step 2: Set Aging Time is highlighted. Press . Enter a decimal number as bridge aging period in seconds.
Signamax FO-065-7732AF Manageable Gigabit Switch Enter a decimal number as flood limit in packets per second. Step 3: Otherwise, you may move to highlight Unlimited, and press . BROADCAST LIMIT Step 1: Move to highlight [Broadcast Limit] and press . Broadcasting Options Step 2: Set Broadcast Limit is highlighted. Press . Enter a decimal number as broadcast limit in packets per second. Step 3: Otherwise, you may move to highlight Unlimited, and press .
Signamax FO-065-7732AF Manageable Gigabit Switch Static Filtering Move to highlight [Static Filtering] from [Advanced Management] screen, and press .
Signamax FO-065-7732AF Manageable Gigabit Switch SOURCE/DESTINATION MAC ADDRESS OUT-FILTERS Step 1: Move to highlight source MAC addresses or destination MAC addresses for static filtering, and press . Add/Delete/Search Step 2: Press and [+] on keypad to add a specific MAC address to be filtered. Press [-] to delete a specific MAC address from being filtered. Press to search through current list of MAC addresses in the static filtering database.
Signamax FO-065-7732AF Manageable Gigabit Switch Add/Delete/Search Step 2: Press and [+] on keypad to add a specific MAC address to be filtered. Press [-] to delete a specific MAC address from being filtered. Press to search through current list of MAC addresses in the static filtering database. The static filtering database maximum capacity is 128. * No precautionary message appears before you delete a specific MAC address from being filtered. * Be sure you want to delete it before doing so.
Signamax FO-065-7732AF Manageable Gigabit Switch SPANNING TREE CONFIGURATIONS Step 1: Move to highlight [Spanning Tree Configurations] if you want to change Spanning Tree Protocol Configurations. Spanning Tree Protocol Step 2: Press to enter Spanning Tree Options . Decide to have it Disabled or Enabled. Bridge Priority Step 3: Move to highlight Bridge Priority and press . Type a decimal number for the bridge priority and press .
Signamax FO-065-7732AF Manageable Gigabit Switch SPANNING TREE PORT STATES Step 1: Move to highlight [Spanning Tree Port States] if you want to change per port administration status, and press . Step 2: Move to highlight a port if you want to change its administration status, and press . ‘Disabled (Link Down)’ denotes Admin Status Up without a link. ‘Forwarding’ denotes Admin Status Up with a link.
Signamax FO-065-7732AF Manageable Gigabit Switch SPANNING TREE PATH COSTS Step 1: To change the path cost, move to highlight [Spanning Tree Path Costs] and press . Step 2: Move to highlight All Ports or each port individually, and press . For new path cost, type a decimal number and press .
Signamax FO-065-7732AF Manageable Gigabit Switch SPANNING TREE PORT PRIORITIES Step 1: To change the priority level per port, move to highlight [Spanning Tree Port Priorities] and press . Step 2: Move to highlight All Ports or each port individually, and press . For new priority value, ty pe a decimal number from 0-255, and press . A low value gives the port a greater likelihood of becoming a Root port.
Signamax FO-065-7732AF Manageable Gigabit Switch Enter text and press . Trap Community Name Step 4: Move to highlight Trap Community Name 1 and press . Enter text and press . Repeat to specify up to three more trap community names. Trap Host IP Address Step 5: Move to highlight Trap Host 1 IP Address and press .
Signamax FO-065-7732AF Manageable Gigabit Switch Other Protocols Move to highlight [Other Protocols] from [Advanced Management] screen, and press . GVRP Step 1: Move to highlight GVRP and press . Step 2: Decide to have it Disabled or Enabled. IGMP Step 1: Move to highlight IGMP and press . Step 2: Decide to have it Disabled or set in either Passive or Active mode.
Signamax FO-065-7732AF Manageable Gigabit Switch Port Trunking Move to highlight [Port Trunking] from [Advanced Management] screen, and press . Select Range Step 1: Move to highlight a trunk group to which you want to assign ports, and press to enter Select Range. Step 2: Move to highlight a port range, Port 1-24 or Port 25-26. Select Trunk Ports Step 3: E.g. Port 1-24 is highlighted. Move and press to select a trunk port.
Signamax FO-065-7732AF Manageable Gigabit Switch Port Mirroring Move to highlight [Port Mirroring] from [Advanced Management] screen, and press . Mirror To Step 1: Press to enter Mirror To Options , listing the ports that can be mirrored to. Step 2: Move to highlight the port you want to mirror to and press . Mirror From Step 3: Press to enter Mirror From Options, listing the ports that can be mirrored from.
Signamax FO-065-7732AF Manageable Gigabit Switch QoS Setup Move to highlight [QoS Setup] from [Advanced Management] screen, and press .
Signamax FO-065-7732AF Manageable Gigabit Switch Global Setting Step 1: Move to highlight Global Setting and press . Step 2: Move to highlight QoS Status and press . Move to highlight to enable or disable QoS Status and press . Step 3: Move to highlight Diffserv Expedite Forwarding and press . Move to highlight to enable or disable Diffserv Expedite Forwarding and press . Step 4: Move to highlight ToS/VLAN and press .
Signamax FO-065-7732AF Manageable Gigabit Switch Step 2: Move to highlight User Define Port, Well-Known Port, or Range Port and press . Step 3: Move to highlight the appropriate port and press . Step 4: Press when completed VLAN Step 1: Step 2: Move to highlight VLAN and press to specify the QoS VLAN priority. Move to highlight Drop Priority or Transmit Priority and press .
Signamax FO-065-7732AF Manageable Gigabit Switch ToS Step 1: Step 2: Move to highlight TOS and press to specify the ToS priority. Move to highlight Drop Priority or Transmit Priority and press .
Signamax FO-065-7732AF Manageable Gigabit Switch Profile Step 1: Step 2: Move to highlight Profile and press to select a QoS profile. Move to highlight Megabit Profile or Gigabit Profile and press .
Signamax FO-065-7732AF Manageable Gigabit Switch Port Configuration Step 1: Move to highlight Port Configuration and press to spec ify the port configuration parameters. Step 2: Move to highlight Active Profile, Fixed Drop Priority, or Fixed Transmit Priority and press .
Signamax FO-065-7732AF Manageable Gigabit Switch Rate Control Step 1: Move to highlight Rate Control and press to specify rate control parameters. Step 2: Move to highlight Rate Control, or Port Number and press . Step 3: Press when completed.
Signamax FO-065-7732AF Manageable Gigabit Switch Sending and Receiving Files Move to highlight [File Transfer] from [Advanced Management] screen, and press . If you access the administration console by connecting an RS232 cable directly to the console port at the back of the switch, you will see a [File Transfer] screen. RECEIVE FILE VIA TFTP Step 1: Move to highlight Receive File Via TFTP and press . Step 2: Type the name of the file you intend to receive and press .
Signamax FO-065-7732AF Manageable Gigabit Switch SEND FILE VIA TFTP Step 1: In [File Transfer] screen, move to highlight Send File Via TFTP and press . Step 2: If the default File Type is not the one you intend to send, press . Select the file type you intend to send and press . Step 3: Repeat Step 3-5. RECEIVE FILE VIA KERMIT Step 1: In [File Transfer] screen obtained via console port, move to highlight Receive File Via Kermit and press .
Signamax FO-065-7732AF Manageable Gigabit Switch Restore Default Settings To restore the factory default settings, highlight [Restore Default Settings] from [Switch Management] and press . The switch will be rebooted after confirming Yes as to restore the default settings. Reboot To reboot the switch, highlight [Reboot] from [Switch Management] and press .
Signamax FO-065-7732AF Manageable Gigabit Switch W e b -B a s e d B r o w s e r M a n a g e m e n t The switch provides a web-based browser interface for configuring and managing the switch. This interface allows you to access the switch using a preferred web browser. This chapter describes how to configure the switch using its web-based browser interface. Logging on to the switch SWITCH IP ADDRESS In your web browser, specify the IP address of the switch.
Signamax FO-065-7732AF Manageable Gigabit Switch PASSWORD Enter the factory default password (no password, press Enter directly). Otherwise, enter a user-defined password if you followed the instructions later and changed the factory default password. Understanding the Browser Interface The web browser interface provides three point-and-click buttons at the upper field of the screen for configuring and managing the switch.
Signamax FO-065-7732AF Manageable Gigabit Switch FILE Save settings configured in the browser interface / download upgraded software via TFTP / reboot the switch / logout of the browser interface. BASIC SETUP Perform general, LAN port, and console port activities. ADVANCED SETUP Perform MAC Address Management / Per Port Statistics / Bridging / Static MAC Filters / IP Multicast Group / Spanning Tree Perspective / SNMP / Other Protocols / Port Trunking / Port Mirroring / QoS.
Signamax FO-065-7732AF Manageable Gigabit Switch Performing File Activities Start with Selection Menu Click the [File] button at the upper field of the main display, the menu options appear. SAVING SETTING Step 1: Click Saving Setting to save your configuration settings. Step 2: When you click it, a message asks ”Are you sure you want to save setting? ”, click OK to save it or Cancel to abort it.
Signamax FO-065-7732AF Manageable Gigabit Switch Performing Basic Setup Activities Start with Selection Menu Click the [Basic Setup] button at the upper field of the main display, the menu options appear.
Signamax FO-065-7732AF Manageable Gigabit Switch GENERAL MANAGEMENT CONFIGURATION Step 1: Click General and the screen shows the Basic Setup/General parameters. System Name Step 2: Click in System Name text box on the field of Basic Setup/General. Step 3: Type a system name if it is blank, or replace the current system name with a new one. Location Step 4: Click in Location text box on the field of Basic Setup/General.
Signamax FO-065-7732AF Manageable Gigabit Switch Remote Telnet Login Step 8: To enable or disable access to the switch management program via Telnet, click the appropriate option from Remote Telnet Login drop-down menu. Step 9: Click Update Setting. A confirmation window appears. Click any button at the upper field of the screen to exit. LAN Port Configuration To access the LAN configuration parameters, click Basic Setup button first and then point to LAN Ports and click a suitable option.
Signamax FO-065-7732AF Manageable Gigabit Switch PORT STATUS Step 1: Click Basic Setup _ LAN Port _ Port Status to access a read-only table shows the current settings for all ports.
Signamax FO-065-7732AF Manageable Gigabit Switch PORT SETTING Step 1: Click Basic Setup _ LAN Port _ Port Setting to show the configuration for all ports. Step 2: In the Port column, click the port you want to configure. Admin Setting Step 3: Click the drop-down menu under Admin Setting, decide to disable or enable it. Disable: places the port in DOWN state. In this state, packets cannot be switched to and from the port Enable: places the port in UP state.
Signamax FO-065-7732AF Manageable Gigabit Switch Console Port Configuration To access the console port configuration parameters, click Basic Setup button first and then click Console Port. Baud Rate Step 1: Click an appropriate speed from Baud Rate drop-down menu on the field of Basic Setup/Console Port Configuration. Auto: allows the switch to autobaud between 9600bps and 115,200bps All the other selections force a specific console baud rate.
Signamax FO-065-7732AF Manageable Gigabit Switch Modem Setup String Step 5: If you select Custom_Setup_String, enter the string in the Modem setup String text box. SLIP Step 6: The default modem setup string configures the modem to auto answer. It works for all Hayes-compatible modems. Click an appropriate option from SLIP drop-down menu to disable or enable SLIP. SLIP Address Step 7: If you enable SLIP, type a SLIP address in SLIP Address text box.
Signamax FO-065-7732AF Manageable Gigabit Switch Performing Advanced Setup Activities Start with Selection Menu Click the [Advanced Setup] button at the upper field of the main display, the menu options appear. MAC Address Management From the Advanced Setup menu, point to MAC Address Management to view VLANs and their associated MAC addresses.
Signamax FO-065-7732AF Manageable Gigabit Switch PER VLAN VIEW Step 1: Click Per VLAN View first, and click on the VLAN ID that you want to view.
Signamax FO-065-7732AF Manageable Gigabit Switch Step 2: Click to close the VLAN Activities window when finished viewing.
Signamax FO-065-7732AF Manageable Gigabit Switch PER PORT VIEW Step 1: Click Advanced Setup _ MAC Address Management _ Per Port View first, and click on the port that you want to view. Step 2: Click to close the Per Port VLAN Activitie s window when finished viewing. INDIVIDUAL MAC VIEW Step 1: Click Advanced Setup _ MAC Address Management _ Individual MAC View . Step 2: Click in the Enter MAC Address text box and type the MAC address that you want to view.
Signamax FO-065-7732AF Manageable Gigabit Switch Per Port Statistics Step 1: To access per port statistics, click the Advanced Setup button, and then click Per Port Statistics from the selection menu. Step 2: Click a port to view statistic data. Step 3: Click Update Setting when completed.
Signamax FO-065-7732AF Manageable Gigabit Switch Bridging To access bridging parameters, click the Advanced Setup button, and then click Bridging from the selection menu. Aging Options Step 1: Click the drop-down list for Disabled (No Aging) or Set Aging Time. Aging Time Step 2: When Set Aging Time is selected, click in this text box and type a decimal number as bridge aging period in seconds. Flood Limit Step 3: Click the drop-down list for No Flooding, Controlled Flooding, Unlimited Flooding.
Signamax FO-065-7732AF Manageable Gigabit Switch Static MAC Filter To access the static MAC filter parameters, click the Advanced Setup button, and point to Static MAC Filter in the selection menu.
Signamax FO-065-7732AF Manageable Gigabit Switch SOURCE MAC ADDRESS Step 1: Click Source MAC Address. Add Source MAC Address Step 2: Click Add MAC Addr button to add a source MAC address for static filtering. Step 3: The Static Source MAC Filter window appears. Click in the Source MAC Address Filter text box and type a unique MAC source address you want to add. Step 4: Click the Add button. Step 5: A confirmation window appears. Click to close the confirmation window.
Signamax FO-065-7732AF Manageable Gigabit Switch DESTINATION MAC ADDRESS Step 1: Click the Advanced Setup button, and point to Static MAC Filter in the selection menu. Click Destination MAC Address. Step 2: Click Add MAC Addr button to add a destination MAC address for static filtering. Refer to Step 2~5 in Source MAC Address section for similar procedure. Step 3: Click Delete MAC Addr button to delete a destination MAC address for static filtering.
Signamax FO-065-7732AF Manageable Gigabit Switch IP Multicast Group To view the IP multicast group addresses, click the Advanced Setup button, and click IP Multicast Group in the selection menu. The information is read-only.
Signamax FO-065-7732AF Manageable Gigabit Switch Spanning Tree Perspective To view the spanning tree perspective parameters, click the Advanced Setup button, and point to Spanning Tree Perspective in the selection menu. CONFIGURATIONS Step 1: To view and/or change the Spanning Tree configurations, click Configurations from the above screen. Spanning Tree Protocol Step 2: Specify whether you want to have it Disabled or Enabled by clicking the drop-down list.
Signamax FO-065-7732AF Manageable Gigabit Switch Forward Delay Step 6: Click in the text box and type a decimal number between 4 and 30. Step 7: Click Update Setting. A confirmation window appears. Click to close the confirmation window. PORT SETTING Step 1: To view and/or change the Spanning Tree configurations by port, click the Advanced Setup button, point to Spanning Tree Perspective in the selection menu, and click Port Setting.
Signamax FO-065-7732AF Manageable Gigabit Switch Step 6: Click Update Setting. A confirmation window appears. Click to close the confirmation window. SNMP To view and/or change all SNMP-related information, click the Advanced Setup button, and click SNMP in the selection menu. The SNMP Configurations window appears. As shown below, the factory-default SNMP value is Enabled and the factory-default Community Name value is public.
Signamax FO-065-7732AF Manageable Gigabit Switch Trap Commun ity Name Step 4: Click in the text box and type a trap community name. Trap Host IP Address Step 5: Click in the text box and type a IP address for trap host 1~4. Cold Start Trap Step 6: Specify whether it is Disabled or Enabled by clicking the drop-down list. Warm Start Trap Step 7: Specify whether it is Disabled or Enabled by clicking the drop-down list.
Signamax FO-065-7732AF Manageable Gigabit Switch Other Protocols To enable or disable the GVRP and/or IGMP protocols, click the Advanced Setup button, and click Other Protocols in the selection menu. GVRP Step 1: IGMP Step 2: Step 3: 86 Specify whether it is Disabled or Enabled by clicking the drop-down list. Specify whether it is Disabled or Passive or Active by clicking the drop-down list. Click Update Setting when completed. A confirmation window appears. Click to close the confirmation window.
Signamax FO-065-7732AF Manageable Gigabit Switch User’s Manual 87
Signamax FO-065-7732AF Manageable Gigabit Switch 88 User’s Manual
Signamax FO-065-7732AF Manageable Gigabit Switch Port Trunking To use the switch’s trunking capability to gain more bandwidth, click the Advanced Setup button, and click Port Trunking in the selection menu. Step 1: The Port Trunking Overview window appears. E.g. Click Trunk Group 1 in the Trunk Group column. Step 2: The Trunk Group 1 Setup window appears. Click the drop-down menu to select a desired range. E.g. click Port 1~24. Step 3: Click to assign a maximum of four ports to the trunk group.
Signamax FO-065-7732AF Manageable Gigabit Switch Port Mirroring To use the switch’s mirroring capability to mirror one port to another, click the Advanced Setup button, and click Port Mirroring in the selection menu. Mirror To Step 1: Click the Index and the Port Mirroring Setting window appears. Step 2: Click the port you want to mirror to in the Mirror To column. Mirror From Step 3: In the Mirror From column, select a “mirror from” port by clicking the drop-down list.
Signamax FO-065-7732AF Manageable Gigabit Switch QoS To use the switch’s mirroring capability to mirror one port to another, click the Advanced Setup button, and click QoS in the selection menu. Global Setting Step 1: Point to Advanced Setup, point to QoS, and Click Global Setting. Step 2: Use the DiffServ Expedite Forwarding drop-down list to specify whether you want to enable or disable DiffServ Expedite Forwarding. Step 3: Use the TOS/VLAN Tag drop-down list to select the priority you want to use.
Signamax FO-065-7732AF Manageable Gigabit Switch Logic Port Step 7: Point to Advanced Setup, point to QoS, and Click Logic Port. Step 8: Point to Advanced Setup, point to QoS, point to Logic Port, and click User Define Port, Well-Known Port, or Range Logic Port. Step 9: Click Update Setting when completed. A confirmation window appears. Click to close the confirmation window.
Signamax FO-065-7732AF Manageable Gigabit Switch VLAN Step 10: Point to Advanced Setup, point to QoS, and Click VLAN. Step 11: For each VLAN priority, use the right drop-down list to select a Transmit Priority for that VLAN and use the right drop-down list to select a High or Low Drop Priority for that VLAN. Step 12: Click Update Setting when completed. A confirmation window appears. Click to close the confirmation window.
Signamax FO-065-7732AF Manageable Gigabit Switch Type of Service Step 13: Point to Advanced Setup, point to QoS, and Click Type of Service . Step 14: For each Type of Service priority, use the right drop-down list to select a Transmit Priority for that Type of Service and use the right drop-down list to select a High or Low Drop Priority for that Type of Service. Step 15: Click Update Setting when completed. A confirmation window appears. Click to close the confirmation window.
Signamax FO-065-7732AF Manageable Gigabit Switch Profile Step 16: Point to Advanced Setup, point to QoS, and Click Profile . Step 17: You can specify 10/100M Profile Settings or Gigabit Profile Settings . Step 18: Click Update Setting when completed. A confirmation window appears. Click to close the confirmation window.
Signamax FO-065-7732AF Manageable Gigabit Switch Port Configuration Step 19: Point to Advanced Setup, point to QoS, and Click Port Configuration. Step 20: Click a port number under Port. Use the Active Profile drop-down list to select a different active profile. Step 21: Click Update Setting when completed. A confirmation window appears. Click to close the confirmation window. Rate Control Step 22: Point to Advanced Setup, point to QoS, and Click Rate Control.
Signamax FO-065-7732AF Manageable Gigabit Switch SNMP & RMON Management This chapter describes the switch’s Simple Network Management Protocol (SNMP) and Remote Monitoring (RMON) capabilities. Overview RMON is an abbreviation for the Remote Monitoring MIB (Management Information Base). RMON is a system defined by the Internet Engineering Task Force (IETF) document RFC 1757, which defines how networks can be monitored remotely.
Signamax FO-065-7732AF Manageable Gigabit Switch - Retrieving MIB counters from various layers of software modules according to the SNMP GET/GET NEXT frame messages. - Setting MIB variables according to the SNMP SET frame message.
Signamax FO-065-7732AF Manageable Gigabit Switch - RMON Alarm Group – allows a network administrator to define alarm thresholds for any MIB variable. An alarm can be associated with Low Threshold, High Threshold, or both. A trigger can trigger an alarm when the value of a specific MIB variable exceeds a threshold, falls below a threshold, or exceeds or falls below a threshold. - RMON Event Group – allows a network administrator to define actions based on alarms.
Signamax FO-065-7732AF Manageable Gigabit Switch Specifications Signamax FO-065-7732AF Manageable Gigabit Switch Applicable Standards Switching Method Forwarding Rate 100BaseFX: 1000BaseSX/LX: Performance Cable 100BaseFX: 1) Fixed 24 x 100BaseFX ports with ST or SC connectors 2) With fixed 2 x 1000BaseSX/LX ports with SC connectors IEEE 802.3u 100BaseFX IEEE 802.
Signamax FO-065-7732AF Manageable Gigabit Switch Operating Temperature Storage Temperature Humidity Emissions User’s Manual 0°C to 40° C (32°F to 104°F) -25°C to 70°C (-13°F to 158°F) 10%-90% non-condensing FCC part 15 Class A, CE Mark Class A 101
