Signamax Connectivity Systems Gigabit Ethernet Media Converter U S E R ’ S G U I D E
Signamax Connectivity Systems Gigabit Ethernet Media Converter User’s Guide
Signamax Gigabit Ethernet Media Converter FCC Statement The FCC (Federal Communications Commission) restricts the amount of radio frequency emission and radiation coming from computer equipment. The equipment introduced in this manual has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Signamax Gigabit Ethernet Media Converter Table of Contents FCC STATEMENT .................................................................................................... 1 TRADEMARKS .......................................................................................................... 1 PREFACE................................................................................................................... 1 TABLE OF CONTENTS.......................................................................
Signamax Gigabit Ethernet Media Converter Introduction The Signamax Gigabit Ethernet Media Converter, provides one channel for media conversion between 1000BaseSX/LX to 1000BaseLX. It can be used as a stand-alone device or with a standard 19” chassis as shown below. Product Overview Figure 1: 1000BaseT 1000BaseSX/LX Media Converter The chassis is to be ordered separately.
Signamax Gigabit Ethernet Media Converter Packing List When you unpack this product package, you will find the items listed below. Please inspect the contents, and report any apparent damage or missing items immediately to your authorized reseller. — The Media Converter — User’s Manual — AC to DC Power Adaptor — Warranty Card O n e -Channel Media Converter Physical Ports 1000T 1000SX/LX Media Converter This converter provides one TX port and one FX port.
Signamax Gigabit Ethernet Media Converter 1000T to 1000SX/LX: LEDs State Indication Power Steady Power feed is OK Off No power Steady TX port: A valid network connection has been established LNKC LNKC stands for LINK/Copper LNKF Off No connection Steady FX port: A valid network connection has been established LNKF stands for LINK/Fiber FDX/COL Off No connection Steady Connection in full-duplex mode FDX stands for FULL DUPLEX Flashing Collision occurred COL stands for COLLISION RX T
Signamax Gigabit Ethernet Media Converter Installation This chapter gives step-by-step installation instructions for the Converter. Selecting a Site for the Equipment As with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference. Specifically, the site you select should meet the following requirements: The ambient temperature should be between 32 and 104 degrees Fahrenheit (0 to 40 degrees Celsius).
Signamax Gigabit Ethernet Media Converter S p e c i f i c a t io n s Applicable Standards IEEE 802.3ab 1000BaseT, IEEE 802.3z 1000BaseSX/LX Fixed Ports 1000T to 1000SX/LX: One twisted-pair port meeting IEEE 802.3ab standard specification; Category 5e or better cable, 100 meters maximum distance One fiber optic port meeting IEEE 802.
Signamax Gigabit Ethernet Media Converter Appendix A: Ordering Information Please include the following information when ordering: 1. Fiber type: multi-mode or single-mode 2. Fiber connector type: SC 3.
Signamax Gigabit Ethernet Media Converter Appendix B: Contact Information SIGNAMAX CONNECTIVITY SYSTEMS An AESP Company 1810 N.E. 144th Street. North Miami, Florida 33181, U.S.A. Phone: 305-944-7710 Fax: 305-652-8489 Sales: 800-446-2377 Tech. Support: 800-446-2377, ext. 201 Http://www.signamax.com E-mail: info@signamax.com EUROPE AESP Ukraine. (UKRAINE) 2 Timiryazevskaya St. 47 252014 Kiev, Ukraine Phone: +380 44 296.53.57 Fax: +380 44 294.88.60 Http://www.aesp.com.ua E-mail: aesp@aesp.com.
