Installation manual

4-335
SIGNAMAX LLC • www.signamax.eu
show mvr
This command shows information about the global MVR configuration settings when
entered without any keywords, the interfaces attached to the MVR VLAN using the
interface keyword, the multicast groups assigned to the MVR VLAN using the members
keyword, or the interfaces assigned to MVR receiver groups using the receiver-group
members keyword.
Syntax
show mvr [ interface [interface] | members [ip-address] | receiver-group members ]
• interface
• ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-28)
• port-channel channel-id (Range: 1-8)
• ip-address - IP address for an MVR multicast group.
(Range: 224.0.1.0 - 239.255.255.255)
•
receiver-group members - Displays interfaces assigned to the MVR receiver
groups, and the current MVR status for each group.
Default Setting
Displays global configuration settings for MVR when no keywords are used.
Command Mode
Privileged Exec
Command Usage
Enter this command without any keywords to display the global settings for MVR.
Use the interface keyword to display information about interfaces attached to the
MVR VLAN, the members keyword to display information about multicast groups
assigned to the MVR VLAN, or the receiver-group members keyword to display
information about multicast groups assigned to the MVR Receiver VLAN.
Example
The following shows the global MVR settings:
Console#show mvr
MVR Status:enable
MVR Running Status:TRUE
MVR Multicast VLAN:1
MVR Max Multicast Groups:255
MVR Current Multicast Groups:10
MVR Receiver VLAN:3
MVR Supported Receiver Multicast Groups:5
MVR Used Receiver Multicast Groups:1
Console#