Installation manual

3-13
SIGNAMAX LLC • www.signamax.eu
Web – Click System, System Information. Specify the system name, location, and contact
information for the system administrator, then click Apply. (This page also
includes a
Telnet button that allows access to the Command Line Interface via Telnet.)
Figure 3-3 System Information
CLI – Specify the hostname, location and contact information.
Console(config)#hostname R&D 5 4-18
Console(config)#snmp-server location WC 9 4-86
Console(config)#snmp-server contact Ted 4-86
Console(config)#exit
Console#show system 4-33
System Description: 24 port 10/100 Managed Layer 2 Switch
with 4 x Gigabit Combo ports
System OID String: 1.3.6.1.4.1.259.6.10.94
System Information
System Up Time: 0 days, 2 hours, 26 minutes, and 30.55 seconds
System Name: R&D 5
System Location: WC 9
System Contact: Ted
MAC Address (Unit1): 00-16-B6-F0-71-3C
Web Server: Enabled
Web Server Port: 80
Web Secure Server: Enabled
Web Secure Server Port: 443
Telnet Server: Enable
Telnet Server Port: 23
Jumbo Frame: Disabled
POST result
Timer Test ................... PASS
UART Loopback Test ........... PASS
DRAM Test .................... PASS
Switch Int Loopback Test ..... PASS
Done All Pass.
Console#