Installation manual

4-289
SIGNAMAX LLC • www.signamax.eu
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises extended Power-over-Ethernet capability details, such as
power availability from the switch, and power state of the switch, including whether
the switch is operating from primary or backup power (the Endpoint Device could
use this information to decide to enter power conservation mode).
Example
lldp medtlv inventory
This command configures an LLDP-MED-enabled port to advertise its inventory
identification details. Use the no form to disable this feature.
Syntax
[no] lldp medtlv inventory
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises device details useful for inventory management, such as
manufacturer, model, software version and other pertinent information.
Example
lldp medtlv location
This command configures an LLDP-MED-enabled port to advertise its location
identification details. Use the no form to disable this feature.
Syntax
[no] lldp
medtlv location
Default Setting
Enabled
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp medtlv extpoe
Console(config-if)#
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp medtlv inventory
Console(config-if)#