Installation manual

4-288
SIGNAMAX LLC • www.signamax.eu
Command Usage
Refer to “Frame Size Commands” on page 4-35 for information on configuring the
maximum frame size for this switch.
Example
lldp dot3-tlv poe
This command configures an LLDP-enabled port to advertise its Power-over-Ethernet
(PoE) capabilities. Use the no form to disable this feature.
Syntax
[no] lldp dot3-tlv poe
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises Power-over-Ethernet capabilities, including whether or not
PoE is supported, currently enabled, if the port pins through which power is
delivered can be controlled, the port pins selected to deliver power, and the power
class.
Example
lldp medtlv extpoe
This command configures an LLDP-MED-enabled port to advertise and accept Extended
Power-over-Ethernet configuration and usage information. Use the no form to disable this
feature.
Syntax
[no] lldp medtlv extpoe
Default Setting
Enabled
Console(config)#interface ethernet 1/1
Console(config-if)#lldp dot3-tlv max-frame
Console(config-if)#
Console(config)#interface ethernet 1/1
Console(config-if)#lldp dot3-tlv poe
Console(config-if)#