Installation manual

4-275
SIGNAMAX LLC • www.signamax.eu
* Vendor-specific options may or may not be advertised by neighboring devices.
lldp
This command enables LLDP globally on the switch. Use the no form to disable LLDP.
Syntax
[no] lldp
Default Setting
Enabled
Command Mode
Global Configuration
Example
lldp dot3-tlv
max-frame
Configures an LLDP-enabled port to advertise its maximum
frame size
IC 4-287
lldp dot3-tlv
poe
Configures an LLDP-enabled port to advertise its
Power-over-Ethernet capabilities
IC 4-288
lldp medtlv
extpoe
Configures an LLDP-MED-enabled port to advertise its
extended Power over Ethernet configuration and usage
information
IC 4-288
lldp medtlv
inventory
Configures an LLDP-MED-enabled port to advertise its
inventory identification details
IC 4-289
lldp medtlv
location
Configures an LLDP-MED-enabled port to advertise its
location identification details
IC 4-289
lldp medtlv
med-cap
Configures an LLDP-MED-enabled port to advertise its
Media Endpoint Device capabilities
IC 4-290
lldp medtlv
network-policy
Configures an LLDP-MED-enabled port to advertise its
network policy configuration
IC 4-290
show lldp config Shows LLDP configuration settings for all ports PE 4-291
show lldp info
local-device
Shows LLDP global and interface-specific configuration
settings for this device
PE 4-293
show lldp info
remote-device
Shows LLDP global and interface-specific configuration
settings for remote devices
PE 4-294
show lldp info
statistics
Shows statistical counters for all LLDP-enabled interfaces PE 4-295
Console(config)#lldp
Console(config)#
Table 4-75 LLDP Commands (Continued)
Command Function Mode Page