Installation manual

4-274
SIGNAMAX LLC • www.signamax.eu
Table 4-75 LLDP Commands
Command Function Mode Page
lldp Enables LLDP globally on the switch GC 4-275
lldp holdtime-multiplier Configures the time-to-live (TTL) value sent in LLDP
advertisements
GC 4-276
medFastStartCount Configures how many medFastStart packets are transmitted GC 4-276
lldp notification-interval Configures the allowed interval for sending SNMP
notifications about LLDP changes
GC 4-277
lldp refresh-interval Configures the periodic transmit interval for LLDP
advertisements
GC 4-278
lldp reinit-delay Configures the delay before attempting to re-initialize after
LLDP ports are disabled or the link goes down
GC 4-278
lldp tx-delay Configures a delay between the successive transmission of
advertisements initiated by a change in local LLDP MIB
variables
GC 4-279
lldp admin-status Enables LLDP transmit, receive, or transmit and receive
mode on the specified port
IC 4-279
lldp notification Enables the transmission of SNMP trap notifications about
LLDP changes
IC 4-280
lldp mednotification Enables the transmission of SNMP trap notifications about
LLDP-MED changes
IC 4-281
lldp basic-tlv
management-ip-address
Configures an LLDP-enabled port to advertise the
management address for this device
IC 4-281
lldp basic-tlv
port-description
Configures an LLDP-enabled port to advertise its port
description
IC 4-282
lldp basic-tlv
system-capabilities
Configures an LLDP-enabled port to advertise its system
capabilities
IC 4-283
lldp basic-tlv
system-description
Configures an LLDP-enabled port to advertise the system
description
IC 4-283
lldp basic-tlv
system-name
Configures an LLDP-enabled port to advertise its system
name
IC 4-284
lldp dot1-tlv
proto-ident*
Configures an LLDP-enabled port to advertise the supported
protocols
IC 4-284
lldp dot1-tlv
proto-vid*
Configures an LLDP-enabled port to advertise port related
VLAN information
IC 4-285
lldp dot1-tlv
pvid*
Configures an LLDP-enabled port to advertise its default
VLAN ID
IC 4-285
lldp dot1-tlv
vlan-name*
Configures an LLDP-enabled port to advertise its VLAN
name
IC 4-286
lldp dot3-tlv
link-agg
Configures an LLDP-enabled port to advertise its link
aggregation capabilities
IC 4-286
lldp dot3-tlv
mac-phy
Configures an LLDP-enabled port to advertise its MAC and
physical layer specifications
IC 4-287