Installation manual

4-266
SIGNAMAX LLC • www.signamax.eu
Default Setting
All protocol groups are displayed.
Command Mode
Privileged Exec
Example
This shows protocol group 2 configured for IP over RFC 1042:
show protocol-vlan protocol-group-vid
This command shows the mapping from protocol groups to VLANs.
Syntax
show protocol-vlan protocol-group-vid
Default Setting
The mapping for all protocol groups is displayed.
Command Mode
Privileged Exec
Example
This shows that traffic matching the specifications for protocol group 2 will be mapped to
VLAN 2:
Console#show protocol-vlan protocol-group
ProtocolGroup ID Frame Type Protocol Type
------------------ ------------- ---------------
2 RFC 1042 08 00
Console#
Console#show protocol-vlan protocol-group-vid
ProtocolGroup ID VLAN ID
------------------ -----------
2 VLAN2
Console#