Installation manual

4-257
SIGNAMAX LLC • www.signamax.eu
Command Mode
Global Configuration
Command Usage
• Use this command to create a new traffic-segmentation client session.
• Using the no form of this command will remove any assigned uplink or downlink
ports, restoring these interfaces to normal operating mode.
Example
pvlan up-to-up
This command specifies whether or not traffic can be forwarded between uplink ports
assigned to different client sessions. Use the no form to restore the default.
Syntax
[no] pvlan up-to-up {blocking | forwarding}
• blocking – Blocks traffic between uplink ports assigned to different sessions.
• forwarding – Forwards traffic between uplink ports assigned to different
sessions.
Default Setting
Blocking
Command Mode
Global Configuration
Example
This example enables forwarding of traffic between uplink ports assigned to different
client sessions.
show pvlan
This command displays the traffic segmentation configuration settings.
Syntax
show pvlan [session session-id]
session-id – Traffic segmentation session. (Range: 1-15)
Command Mode
Privileged Exec
Console(config)#pvlan session 1
Console(config)#
Console(config)#pvlan up-to-up
Console(config)#