Installation manual

3-7
SIGNAMAX LLC • www.signamax.eu
Port Broadcast Control Sets the broadcast storm threshold for each port 3-144
Trunk Broadcast Control Sets the broadcast storm threshold for each trunk 3-144
Mirror Port Configuration Sets the source and target ports for mirroring 3-146
Rate Limit 3-147
Input Port Configuration Sets the input rate limit for each port 3-147
Input Trunk Configuration Sets the input rate limit for each trunk 3-147
Output Port Configuration Sets the output rate limit for ports 3-147
Output Trunk Configuration Sets the output rate limit for trunks 3-147
Port Statistics Lists Ethernet and RMON port statistics 3-148
Address Table 3-153
Static Addresses Displays entries for interface, address or VLAN 3-153
Dynamic Addresses Displays or edits static entries in the Address Table 3-154
Address Aging Sets timeout for dynamically learned entries 3-156
Spanning Tree 3-156
STA 3-156
Information Displays STA values used for the bridge 3-158
Configuration Configures global bridge settings for STA and RSTP 3-161
Port Information Displays individual port settings for STA 3-165
Trunk Information Displays individual trunk settings for STA 3-165
Port Configuration Configures individual port settings for STA 3-168
Trunk Configuration Configures individual trunk settings for STA 3-168
MSTP 3-171
VLAN Configuration Configures priority and VLANs for a spanning tree instance 3-171
Port Information Displays port settings for a specified MST instance 3-174
Trunk Information Displays trunk settings for a specified MST instance 3-174
Port Configuration Configures port settings for a specified MST instance 3-176
Trunk Configuration Configures trunk settings for a specified MST instance 3-176
VLAN 3-177
802.1Q VLAN 3-177
GVRP Status Enables GVRP on the switch 3-181
802.1Q Tunnel
Configuration
Enables 802.1Q (QinQ) Tunneling 3-194
Basic Information Displays information on the VLAN type supported by this switch 3-181
Table 3-2 Main Menu (Continued)
Menu Description Page