Installation manual

3-3
SIGNAMAX LLC • www.signamax.eu
Configuration Options
Configurable parameters have a dialog box or a drop-down list. Once a configuration
change has been made on a page, be sure to click on the Apply button to confirm the new
setting. The following table summarizes the web page configuration buttons.
Notes: 1.
To ensure proper screen refresh, be sure that Internet Explorer is configured so
that the setting “Check for newer versions of stored pages” reads “Every visit to
the page”.
Internet Explorer 6.x and earlier: This option is available under the menu “Tools /
Internet Options / General / Temporary Internet Files / Settings”.
Internet Explorer 7.x: This option is available under “Tools / Internet Options /
General / Browsing History / Settings / Temporary Internet Files”.
2. You may have to manually refresh the screen after making configuration changes
by pressing the browser’s refresh button.
Panel Display
The web agent displays an image of the switch’s ports. The Mode can be set to display
different information for the ports, including Active (i.e., up or down), Duplex (i.e., half or
full duplex, or Flow Control (i.e., with or without flow control). Clicking on the image of a
port opens the Port Configuration page as described on page 3-130.
Figure 3-2 Panel Display
Table 3-1 Configuration Options
Button Action
Revert Cancels specified values and restores current values prior to pressing Apply.
Apply Sets specified values to the system.
Help Links directly to webhelp.