Installation manual

4-195
SIGNAMAX LLC • www.signamax.eu
Default Setting
Shows the status for all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed. For a
description of the items displayed by this command, see “Displaying Connection
Status” on page 3-128.
Example
Console#show interfaces status ethernet 1/5
Information of Eth 1/5
Basic Information:
Port Type: 100TX
Mac Address: 00-12-CF-61-24-34
Configuration:
Name:
Port Admin: Up
Speed-duplex: Auto
Capabilities: 10half, 10full, 100half, 100full
Broadcast Storm: Enabled
Broadcast Storm Limit: 64 Kbits/second
Flow Control: Disabled
LACP: Disabled
Port Security: Disabled
Max MAC Count: 0
Port Security Action: None
Media Type: None
Current Status:
Link Status: Up
Port Operation Status: Up
Operation Speed-duplex: 100full
Flow Control Type: None
Console#show interfaces status vlan 1
Information of VLAN 1
MAC Address: 00-12-CF-12-34-56
Console#