Installation manual

4-181
SIGNAMAX LLC • www.signamax.eu
access-list mac
This command adds a MAC access list and enters MAC ACL configuration mode. Use the
no form to remove the specified ACL.
Syntax
[no] access-list mac acl_name
acl_name – Name of the ACL. (Maximum length: 16 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
• When you create a new ACL or enter configuration mode for an existing ACL, use
the permit or deny command to add new rules to the bottom of the list. To create
an ACL, you must add at least one rule to the list.
• To remove a rule, use the no permit or no deny command followed by the exact
text of a previously configured rule.
• An ACL can contain up to 32 rules.
Example
Related Commands
permit, deny (4-182)
mac access-group (4-184)
show mac access-list (4-183)
Console(config)#access-list mac jerry
Console(config-mac-acl)#